Forklift Training Schools Burlington

Forklift Training Schools Burlington - Forklift Training Schools - The Best Option To Have A Safe And Efficient Work Place

Are you searching for work as a forklift driver? Our regulatory-compliant mobile equipment operator training provides instruction in kinds of lift trucks, pre-shift check, fuel types and handling of fuels, and safe use of a forklift. Practical, hands-on training helps people participating in obtaining fundamental operational skills. Course content covers existing rules governing the use of lift trucks. Our proven forklift Schools are intended to provide training on these kinds of trucks: narrow isle forklift, counterbalanced forklift and powered pallet truck.

While the forklift is in operation, do not lower or raise the forks. Loads must not extend higher than the backrest. This is because of the risk of the load sliding back in the direction of the operator. Check for overhead obstructions and ensure there is plenty of clearance before raising a load. Stay away from overhead power lines. When the load is raised straight up, tilt it slightly back.

The lift truck is less stable when a load is in a raised position. Make certain that no body ever walks beneath the elevated fork. The operator should never leave the forklift when the load is raised.

While handling pallets, forks must be level and high enough to go into the pallet and extend all the way under the load. The width of the forks should provide even distribution of weight.

Chock the wheels and set the brakes prior to loading and unloading the truck. The floors must be strong enough to support the combined weight of the forklift and its load. Fixed jacks can be installed to be able to support a semi-trailer that is not attached to a tractor. The height of the entrance door must clear the height of the forklift by a minimum of 5 cm. Edges of docks, rail cars and ramps must be marked and avoid them.

Click to Download the pdf