Forklift Training School Burlington

Forklift Training School Burlington - Forklift Training School And What It Really Has To Offer - Industry and federal regulators have established the criteria for forklift safety training based on their existing standards and regulations. Individuals wanting to operate a forklift should finish a forklift training program prior to utilizing one of these equipment. The accredited Forklift Operator Training Program is intended to provide trainees with the practical skills and knowledge to become an operator of a forklift.

There are forklift operation safety rules that must be followed pertaining to pre-shift checks, and rules for loading and lifting.

An inspection checklist must be done and submitted to the supervising authority prior to starting a shift. When a maintenance issue is uncovered, the use of the specific machine must be discontinued until the issue has been dealt with. To indicate the machinery is out of service, the keys have to be removed from the ignition and a warning tag placed in a visible place.

Safety rules for loading will consist of checking the forklift's load rating capacity to know how much the machinery could handle. When starting the machinery, the forks should be in the down position. Keep in mind that there is a loss of roughly one hundred pounds carrying capacity for every inch further away from the carriage that the load is carried.

Lifting should begin with the driver moving to a stopped position approximately three inches from the load. The mast must then be leveled until it has reached a right angle with the load. Raise the forks to one inch below the slot on the pallet and drive forward. Then lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to warn other workers. Do not allow forks to drag on the ground.

Click to Download the pdf